Stontex Porcelain Protector Sealer

Description

Porcelain Protector 1L

This is a specially formulated sealer for both internal tiles and external porcelain paving. Even if the porcelain tile / paving is factory sealed it can be used to increase the stain resistance properties of the material, which will make it easier to clean and maintain. This product will not change the look or slip resistance of the material as it is a penetrating treatment.

 

Application Instructions

Best to be applied using a roller and allow the treatment to penetrate into the material for about 20- 30 mins and then buff all the residue from the surface. Product can also be sprayed but application with roller ensures that the treatment penetrates better into the material again ensure that any residue is removed after the 20 -30 min dwell time. Normally one coat is sufficient as porcelain is a very dense material.

• Provides a natural matt look finish with oil and water based stain protection.
• Suitable for internal and external use.
• Coverage rate up to 20sqm per litre depending on porosity of the material
• Breathable treatment that will not trap moisture in the treated material

 

Associated Products

Deep clean you’re external paving prior to sealing with our All in one Outdoor Cleaner and for ongoing maintenance use our Green to Clean product no need for constant power washing just spray and walk away.

Deep clean you’re internal tiles prior to sealing with our Heavy Duty Grime Remover and for ongoing maintenance use our Multi Clean dilutes 1 to 50 with warm water in your steam cleaner or a capful in your mop bucket.

This increases the stain resistant of porcelain paving and tiling. This product is easy to apply, has an amazing natural finish and will not make the surface slippy as it is a super impregnating treatment. It can be used for both interior and exterior projects making the porcelain easier to clean and maintain, a must for all porcelain paving/tiles.

• Professional grade porcelain tile / paving sealer

The experts choice, a sealer and protector in one. An oustanding and lasting finish, suitable for all jobs.

If the tile is fully sealed it can be used to increase the stainability so thus easier to clean and maintain. The protector will not change the look or slip resistance of the material.

Application Instructions

Best to be applied using a roller but can be sprayed on a vertical surface.  Allow 30 minutes to dry between coats.

• Stain resistance against oil and water stains
• Internal or External

Coverage Rate: Up to 40 sqm per litre depending on the porosity of the tile.

Stontex Porcelain Protector – Data Sheet – Click Here To Download/View