Platinum Stone Sealer 1L & 5L
This product is used to help protect natural stone paving, tiles and brick from oil and water based staining. Treating your material with this sealer will also help make ongoing maintenance and cleaning much easier. It is a water based odourless penetrating sealer, which will retain the existing colour of the stone, tile or brick. It is ideal for use internally in a confined space as there is no smell, however it can also be used externally. Even though it is water based it has a very high active ingredient content so the treated surface should perform for between 2-5 years depending on wear and tear.
It is important that the area you are treating be clean and dry prior to applying the sealer. Then you simply either roll on with a normal paint roller onto your paving, or if you prefer you can spray using a knapsack sprayer for large areas or just a simple hand held sprayer. Platinum stone sealer has been formulated as one coat treatment but you can apply an additional coat if your material is unusually porous for optimum protection. It is recommended that the freshly treated material is kept dry and free from footfall traffic for 3 to 6 hours after application.
- High performance water based and low odour formula
- Easy to apply one coat treatment
- Does not change the look or feel of the material
- Coverage rate up to 20sqm per litre depending on porosity of the material.
Deep clean you’re external paving prior to sealing with our All in one Outdoor Cleaner and for ongoing maintenance use our Green to Clean product no need for constant power washing just spray and walk away.
Deep clean you’re internal tiles prior to sealing with our Heavy Duty Grime Remover and for ongoing maintenance use our Multi Clean dilutes 1 to 50 with warm water in your steam cleaner or a capful in your mop bucket.
STONTEX PLATINUM STONE SEALER – how to apply natural stone sealer, just watch the video below:-