Description
Multi Clean – Available in 1 Ltr
Professional regular indoor floor, wall and tile cleaner for suitable commercial use. If you have not tried this before, it is a must, such a great cleaner and once used you will continue to use, the results are amazing.
Stontex multi clean is a PH neutral ongoing maintenance cleaner, which makes up to 50 litres of cleaner. For use on all surfaces including ceramic and porcelain tiles. Ideal as an everyday general purpose cleaner that can bring back the shine on polished tile surfaces and kills all household germs including MRSA and Ecoli.
Stontex Multi Clean – Data Sheet – Click Here To Download/View
Detailed information:-
Multi Clean is best described as an on-going maintenance cleaner. Being a neutral PH cleaner it can be used on most types of natural stone such a polished marble and linestone plus ceramic and porcelain. Due to the its very high dilution rate is is very economical to use depending on the stained area. It contains cleaning agents build to dissolve stains such wax, grease and ingrained dirt. Also can be used a regular floor cleaner to both kill germs and shine tiles, great for using before applying jointex easy.
Application Instructions
It all depends on the soiled area so Multi Clean can be diluted from 1:50 to 1:10 parts to warm water. Apply to the effected areas and scrub to remove/loosen the stains. Then after 5-10 minutes rinse with warm water. Never allow the cleaner to dry on the surface being cleaned. As with many of the others in the Stontex range repeat the process if stains persist, possibly with a higher concentration.
- Suitable for DIY and Professional use.
- Contains no acid, bleach or alkalies.
- Coverage rate up to 800sqm per litre
- For use on external and internal surfaces.
Associated Products
Once your surface is clean and dry then it would always be recommended to seal your material. If it is natural stone or stone effect paving then use either Stontex Rapid Dry for a natural matt finish or Stontex Colour Intensifier for a wet look finish. If the material in question is concrete block paving then use our Stontex Paver Plus and if its porcelain paving / tiles then use our Stontex Porcelain Protector. After treating with a sealer use the appropriate ongoing maintenance cleaner recommended.
Reviews
There are no reviews yet.