Heavy Duty Grime Remover 1L
This ready to use product is very popular with professionals as a cleaner to remove penetrated stains in natural stone, ceramic and porcelain. It is also safe to use on sensitive stone like marble and limestone. This special formula is ultra – effective at dissolving stains like ingrained dirt, wax, grease, oil and other types of stains that has penetrated into the surface of the material.
Apply either diluted with water or neat depending on how bad the staining is, agitate with a soft bristle brush and allow to dwell on the surface for 10 – 15 minutes. Next wash all residue thoroughly with warm water don’t allow the solution to dry on the surface. For heavily soiled surfaces increase the concentration and repeat the process.
- High performance formula for easy application to most surfaces.
- Safe to use with low odour formula.
- Coverage rate up to 30sqm per litre
- Can be used on both internal and external surfaces
Once your stain is removed and the surface is clean and dry then it would always be recommended to seal your material. If it is natural stone or stone effect tiles or paving then use either Stontex Rapid Dry for a natural matt finish or Stontex Colour Intensifier for a wet look finish. If the material in question is concrete block paving then use our Stontex Paver Plus and if its porcelain paving / tiles then use our Stontex Porcelain Protector. After treating with a sealer use the appropriate ongoing maintenance cleaner recommended.
Non acidic heavy duty grime remover suitable for use on most materials including tiles, natural stone, porcelain and ceramic tiles. Highly effective, it dissolves and removes ingrained dirt, wax films, grease and oil. Suitable for internal and external use. An expert finish, highly professional.