Stontex Colour Intensifier – Patio Wet Look Sealer in 1Ltr & 5Ltr

Description

Colour Intensifier 1L & 5L

This product was created to give a long lasting wet look to your natural stone paving and internal tiles. It is a premium solvent based penetrating sealer which will enhance the look without changing the texture i.e. it will not make the material slippery. Colour intensifier not only enhances the colour but is also a sealer providing protection from common staining.

 

Application Instructions

Best to be applied using a roller and allow the treatment to penetrate into the material for about 20- 30 mins and then buff all the residue from the surface. Basically you will have a matt finish when you start and should have a matt not shiny look when you’re finished albeit with a more enhanced colour. Product can be sprayed onto a vertical surface but again ensure that any residue is removed after the 20 -30 min dwell time. Normally one coat is sufficient but if the material looks patchy the following day then it’s more likely very porous and simply apply a second coat to uniform the look.

• Provides a wet look without the shine.
• Suitable for internal and external use, ideal for black / dark stone or tiles
• Coverage rate up to 15sqm per litre depending on porosity of the material
• Breathable treatment that will not trap moisture in the treated material.

 

Associated Products

Deep clean you’re external paving prior to sealing with our All in one Outdoor Cleaner and for ongoing maintenance use our Green to Clean product no need for constant power washing just spray and walk away.

Deep clean you’re internal tiles prior to sealing with our Heavy Duty Grime Remover and for ongoing maintenance use our Multi Clean dilutes 1 to 50 with warm water in your steam cleaner or a capful in your mop bucket.

 

Patio Stone Sealer – Wet Look

Colour intensifier is a solvent based impregnating colour enhancer and sealer for porous stone. It’s one step colour intensifier and impregnator which enhances natural colours and texture. Suitable for internal and external use.

The finish is amazing, a wet look that is not shiney and really brings out the colour of your natural stone patio for example. Also the finish is oil  and stain resistant.

Application Instructions

Best to be applied using a roller but can be sprayed on a vertical surface. Two coats should enough for applying. Always make sure to buff any excess product 20-30 minutes after application.

• Suitable for internal and external use
• Wet look without shine
• Breathable

Coverage – 15 to 25 sqm per litre depending on porosity of the stone

 

Stontex Colour Intensifier – Data Sheet – Click Here To Download/View