Rapid Dry Stone Sealer

Description

Rapid Dry Stone Sealer 1L & 5L

This product was formulated for natural stone external paving but is also a very effective fast drying sealer for internal natural stone tiles. Sealing stone externally can be problematic as it is very hard for the stone to dry out completely prior to application. This creates delays for contractors in particular who wish to lay paving and seal on the same day. With our special unique formula Rapid Dry Stone Sealer can be applied to the paving even if there are still some damp patches on the surface. The treatment will still cure even with the presence of moisture without any adverse reaction or reduction in its stain repellent performance.

Application Instructions

Can be applied using a roller or sprayed on the surface just allow the treatment to penetrate into the material for about 20- 30 mins and then buff all the residue from the surface. Natural stone is porous by nature some stones more porous than others but this 20-30 min dwell time will be sufficient to cover you for all types of stone. Normally one coat is sufficient but for more porous material a second coat can be applied for additional protection.

• Provides a natural matt look finish with oil and water based stain protection.
• Suitable for internal and external use.
• Coverage rate up to 15sqm per litre depending on porosity of the material
• Breathable treatment that will not trap moisture in the treated material

Associated Products

Deep clean you’re external paving prior to sealing with our All in one Outdoor Cleaner and for ongoing maintenance use our Green to Clean product no need for constant power washing just spray and walk away.

Deep clean you’re internal tiles prior to sealing with our Heavy Duty Grime Remover and for ongoing maintenance use our Multi Clean dilutes 1 to 50 with warm water in your steam cleaner or a capful in your mop bucket.