Nexus ProJoint V400-WT 27kg – NEUTRAL (Buff) – Professional Range



ProJoint V400 – WT


 ProJoint V400-WT 27kg – NEUTRAL (Buff)

A two-part professional epoxy resin mortar system suitable for areas of vehicular access up to 40 tonnes




ProJointTM V400-WTTM is available in three colours:  neutral (buff), mid grey and black.:

ProJoint™ V400-WT™
Increased strength 2-part epoxy resin mortar system – suitable for vehicle areas up to 40 tonnes.

The ultimate solution to filling joints between paving slabs and setts, suitable for standard natural stone and concrete paving on pedestrian and vehicular areas with heavy loads up to 40 tonnes.

The two-part epoxy resin system is easily mixed and quickly applied as a slurry to dampened paving.  The ultra high strength of ProJointTM V400-WTTM means that it can be used in the most demanding of environments where heavy traffic loading is required.



      • Permeable bedding mix is not required
      • Two-part resin based mortar system, cement free
      • Heavy traffic loads up to 40 tonnes, ideal for high traffic areas and roadways
      • Self compacting, fast and easy application – without bending or kneeling
      • Professional strength suitable for joint widths of 5mm upwards
      • Weed, pressure washer and frost resistant
      • Suitable for natural stone and concrete paving, setts and slabs

ProJointTM V400-WTTM is not designed for porcelain paving – if you are planning on using porcelain paving, please refer to our ProJointTM Porcelain Primer and Grout.


Due to the high epoxy resin content ProJointTM V400-WTTM will highlight and enhance the natural surface colours and textures of the paving – this sheen can be especially noticeable on grey paving, including granite, so a test area is advised before useIt is important to spread the mix across the total paving area to ensure the potential effect is uniform.  Please note that this is a temporary effect; weathering and foot traffic will accelerate its disappearance.  For extra porous paving, or to minimise any effect use ProJointTM Fusion or ProJointTM V35-UV.

How many tubs do you need? To help you when estimating projects, use the ProJoint Consumption Calculator – HERE

ProJoint V400 information and key facts – CLICK HERE


ProJoint V400 Resin & Hardener Data Sheet – CLICK HERE




Sand  – 25kg

Resin Component – 1.33kg

Hardener – 0.67kg

Total 27kg


Approximate coverage per 27kg kit

Joint Size 600x600mm slabs Four size Indian(600mm Series) 100x100mm setts
5 x 25mm 45m2 39m2 8m2
10 x 25mm 22.5m2 19.5m2 4m2
15 x 25mm 15m2 13m2 2.67m2

Additional information

Weight 27 kg
ProJoint V75-WT Select Quantity

1 x 27kg, 2 x 27kg, 3 x 27kg, 4 x 27kg, 5 x 27kg, 6 x 27kg, 7 x 27kg


There are no reviews yet.

Be the first to review “Nexus ProJoint V400-WT 27kg – NEUTRAL (Buff) – Professional Range”

Your email address will not be published. Required fields are marked *

You may also like…