Joint-It Fine 20KG – Block Paving Sand 2 Colours Available

£54.99

Keep your home weed free with Joint-It block paving sand

Description

Joint-It Fine 20KG – Block Paving Sand 2 Colours Available

Neutral or Grey

 

Natural jointing sand for brick paving. Innovative self-repairing technology constantly repairs microcracks and resists weed growth.

For joints 3mm wide or smaller.

Ideal for residential and Home Improvements.

Keep your driveway weed-free with Joint-It Fine block paving sand.

Our expert solution should be applied by a contractor for long-lasting results.
Where other sands and grouts can crack allowing weeds to flourish, Joint-It Fine is naturally formulated to increase pH levels in the joints to repel weed and windborne weed seed growth in the joints.

Minimum Effort, Maximum Results:
All you need is a whacker plate, water, and a bag of our block paving sand.

  • Weed Resistant
  • !00% Natural Materials
  • Strong & Flexible
  • Innovative Self-Repairing Technology
  • Self-Repair Cracks
  • Stain Resistant
  • Hardens when dry
  • Water-Permeable
  • Certified Environmentally Friendly

    Repairs cracks, prevents weeds

    Joint-It Fine eliminates the task of removing weeds all year round.

    The innovative binding technology in our paving jointing sand creates a joint that constantly repairs any small cracks. Rain swells the 100% raw, organic, natural ingredients in the joint filling sand to consistently repair all microcracks which means no weeds can plant and flourish.

    Joint-It Product Calculator

    Joint-It Fine Step By Step Guide:

    Step 1 – sweep sand into clean, dry joints
  • Step2 – Sweep off excess sand from top of surface
    Step 3 – Compact sand into joints using vibrating/whacker plate.
    Step 4 – Top up with more sand to ensure joints are completely filled.
    Step 5 – Wet paving with light, fine spray.
    Step 6 – Wait 5 – 10 minutes. In temperatures above 15 degrees wait only 3 – 5 minutes.
    Step 7 – Wash off/remove all excess product from top of bricks. Depending on house water pressure, you may need a small electric pressure washer.

    Important Notice:-

    Joint-It Fine is best applied on a newly laid driveway, where there has been no previous weed growth. If applying on an existing driveway, you will need to use a high-power pressure washer to clean out all of the joints to ensure there are no weeds. After this, spray all the joints to ensure no weed plants are left. Then you can apply Joint-It So Fine. Joint-It Fine is a preventative product, but it won’t stop weeds growing that have already planted in the joints before application.

    After Care:-

    All outdoor surfaces require some maintenance when exposed to the changing weather conditions. We recommend cleaning your driveway/brick paving with Joint-It So Clean annually to keep it looking new. With our spray and go formula, Joint-It So Clean requires minimal effort for the best results.

    Joint-It Fine can only be used where there is a permeable base. We recommend a 6:1 sand and cement base. If you are unsure if your base is permeable, run a hose for several minutes on the top of the paving. If the water drains through the joints after about 5 minutes, then the base is permeable. If the water logs on the top, then the base is not permeable.

    Product Safety Sheet – click here

Additional information

Weight N/A
Joint-It Fine

Neutral, Grey

Reviews

There are no reviews yet.

Be the first to review “Joint-It Fine 20KG – Block Paving Sand 2 Colours Available”

Your email address will not be published.