Joint-It Pro Seal – 1L/5L

£24.99£59.99

Good quality paving sealer at great value for money!

SKU: N/A Categories: ,

Description

Joint-It Pro Seal in 1l and 5l bottles

Available in 1L and 5L

Protect your surface against dirt, stains, moss, and algae with Joint-It Pro Seal.

Joint-It Pro Seal is an eco-friendly, strong, and effective sealer for natural stone and concrete surfaces, including paving, paths, roof tiles and walls.

Our brick and concrete sealer create an invisible barrier on your patio or driveway that enhances durability, reduces maintenance time, and keeps your surface looking new all year round.

  • Ready to Use Formulation
  • Stain Resistant
  • Quick Drying
  • Repels moss and lichen formation on surface
  • Suitable for use on patios, paths, roof tiles and walls
  • Environmentally Friendly
  • Non Flammable. Non toxic.

 

Create a Shield Against Dirt and Grime

Our paving sealer penetrates deep into the natural stone and concrete. Suitable for block paving, driveways, concrete and natural stone.

Quick drying, our brick sealer prevents weakening of surfaces through recurring freeze/thaw cycles and repels moss and lichen formation.

 

Product Useage Calculator

Simple, Quick Sealing

Our simple spray-and-go formula means you can spray the sealer on and leave it to do the work.

Joint-It Pro Seal Step By Step Guide:

Step 1 Apply product using a low pressure spray, roller or brush to vertical / horizontal surface to the point of saturation.
Step 2 If required, add a second coat while the first coat is still wet. Do not apply a second coat if the first coat has already dried.

 

Joint-It Pro Seal vs. Joint-It Premium

Both products are fluoropolymers offering slightly differing characteristics. The repellency benefits offered by Joint-It Premium Seal are greater than that of Joint-It Pro Seal.

This means that the polymers are more compact in the Premium Seal and therefore offer more resistance to contaminants. Both offer protection, but one lasts for longer and creates a stronger barrier.

Joint-It Premium Seal is also backed by BBA accreditation, CE mark and ISO9001.

Always test a small hidden area before beginning works. DO NOT DILUTE THIS PRODUCT.

Using a low-pressure spray, roller or brush, apply product to the point of saturation. Ensure application is from bottom to top on vertical surfaces. Take care not to let the product run. As the product starts to soak into the substrate, add a second coat, if required. DO NOT ALLOW PRODUCT TO DRY BETWEEN APPLICATIONS. Product will start to work immediately but may take up to 7 days to reach 100% efficacy.

Clean equipment and tools immediately with water after you have finished.

Product Data Safety Sheet

Joint-It Pro Seal is an eco-friendly, powerful and effective sealer for natural stone and concrete surfaces, including paving, paths, roof tiles and walls.

Additional information

Joint-It Pro Seal

1L, 5L

Reviews

There are no reviews yet.

Be the first to review “Joint-It Pro Seal – 1L/5L”

Your email address will not be published.