Suitable for all lawns with high traffic
Available in 500gm, 1.5kg and 5kg cartons.
A blend of Growmore, NPK 7-7-7 fertiliser and Amenity Dwarf Perennial Ryegrass, suitable for all lawns with high traffic. Quick Fix is ideal for patching or sowing new lawns – particularly for high wear areas. Can be used all year round but water well in periods of dry weather. Contains fertiliser, do not use near ponds or watercourses and wash hands after use.
Green Lawn Technology in the seed produces vigorous roots, strengthening the turf to keep it greener all year round and reduce the need for watering and fertiliser. Quick Fix can be used for new lawns, overseeding and patching.
- With Green Lawn Technology
- 500g Carton Covers up to 20 Square Metres
- 1.5KG Carton Covers up to 60 Square Metres
- 5KG Box Covers up to 142 Square Metres
Green Lawn Technology
Green Lawn Technology amenity grasses are used by professional turf managers in leading sports stadia around the world. They are quick to establish, keep your lawn greener all year round and their increased roots mean they need less watering and fertiliser.
Resistance to Wear and Tear: *****
Speed of Establishment:*****
Fineness of Appearance: **
Tolerance to Drought:****
Suitability for Shady Areas: **
Young grass will appear within 7-14 days under good growing conditions but will take longer if the ground is cold. For best results, sow between March and October.
Sowing a new lawn step by step guide:
1. Remove weeds, stones and rubbish before sowing. Dig to a depth of 15-22cm (6-9in). Level and firm seed bed by raking then treading or light rolling.
2. If possible, leave seed bed for a few weeks and then destroy any weeds.
3. Moisten the ground, mix the seed and then scatter evenly. Sow the seed at a rate of 35g per sq. metre (1 ¼ ozs per sq yard) half from left to right, then half from top to bottom for each section. Rake lightly and firm in seed by treading or light rolling.
4. In case of dry weather use a fine spray to keep seed bed constantly moist.
Overseeding an existing lawn step by step guide:
1. Mow the lawn short then using a spring tine rake or scarifier remove the layers of dead grass or thatch. If possible, spike lawn with a hollow tine fork and brush in some topsoil to relieve any compacted areas.
2. Moisten the ground, mix the seed and then sow the seed at a rate of 25g per sq. metre (¾ ozs per sq yard), scattering evenly. Alternatively, the seed can be mixed with some topsoil and sown by hand to aid distribution and moisture retention.
3. Firm in the seed by treading or light rolling. In case of dry weather use a fine spray to keep seed bed constantly moist.
4. Ideally do not mow existing grass until new grass is growing. If a mow is necessary, raise the cutting height.